| 7025015787945 | 5985014980332 |
| 5985013243461 | 1510000808414 |
| 7025015588807 | 7010015006979 |
| 5905000000136 | 6135014938794 |
| 7025014906701 | 6150012089751 |
| View All | |
Our website offers parametric search capabilities allowing our customers to search for parts through a number of filters, one of which is by National Stock Number, or NSN. A National Stock Number is an identifier applied to any item of supply that is repeatedly procured, stocked, stored, issued, and used throughout the federal supply system. ASAP Inventory has a broad selection of NSN parts 18CT6B such as 5990009140854 from manufacturers like Eaton Corporation. To begin the purchasing process immediately, submit an RFQ today.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-914-0854 Item Description: Synchro Control Tra | 5990 | 009140854 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18ct6b | 1 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| AAVH | SHOULDER DIAMETER | 1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.0600 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.7450 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.6250 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 10.0 DEG CELSIUS |
| AJSL | BODY SIZE | 18 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 360.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 1600.00 MINIMUM AND 2050.00 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 14.50 MINIMUM AND 18.00 MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 45.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0/+6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5200 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/34 GOVERNMENT SPECIFICATION |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVL | PILOT DIAMETER | 0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 17.0 MILLIAMPERES MAXIMUM |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 4600.00 MINIMUM AND 5800.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 70.00 MINIMUM AND 76.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 16.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 25.00 OUTPUT |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.100 INCH-OUNCES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.2500 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
